A-WALL panels are 2-5/8" thick, 4' wide and either 8' or 9' high. They can be cut to specific widths or stacked to meet the dimensional needs of your project. The standard panel is constructed of Firecode® C gypsum board which is a superior sound barrier and more durable than conventional board. This is due to increased weight and density. The panel surfaces are “decoupled” by insulating ribs which reduce sound transmission from one side of the wall to the other. These ribs also create wiring cavities which are sized to accept standard electrical boxes. With A-WALL, you can specify ganged switches and outlets, as well as phone and data boxes, all in the same panel. An optional poly-core is available for buildings being located in severe environments like walk-in coolers or next to production furnaces. Poly-core decreases the sound deadening capability but the insulating value increases to R-9. EPS Core Panels A-WALL EPS (expanded polystyrene) panels are ineffective as a sound barrier but appropriate for special applications. They are available surfaced with FRP, steel or aluminum and have an insulating value of R-12. The EPS panel can be used outdoors or in wet environments such as food processing plants. Wiring must be surface mounted in conduit or wire mold to maintain the wall’s thermal properties.

Return to A-Wall Home Component Systems Inc., 2245 West 114 Street Cleveland, Ohio 44102 216-252-9292 | 800-345-4400 | FAX - 216-889-1263 | 888-432-9274 Email: Privacy policy. Created by TechniServe Corporation Copyright © 2011 Component Systems, Inc. All rights reserved.