Standard Models A standard A-WALL building is shipped complete with a corrugated, galvanized steel roof, the specified number of A-WALL panels, all necessary fasteners and connecting components, a suspended, grid- type steel ceiling, "class A" fire retardant, mineral board ceiling tiles and one walnut finish, honeycomb core, legacy door with frame and hardware. Premium plywood floors, steel floor joists and stairs with landings are standard components of the A-WALL 400 two-story buildings. Forkliftable, steel bases and premium plywood floors are standard and included with A-WALL 500 and Forkliftable buildings. Every A-WALL building arrives on-site completely pre-engineered and accompanied by comprehensive assembly drawings and instructions. No field cutting or fabrication is necessary. All fasteners are included with the exception the floor anchors, which should be sized and specified in accordance with the type of existing floor. All buildings can be equipped with a myriad of optional accessories including steel doors, door glass and windows, sound seal packages, air conditioning and heat, electrical packages (kits, pre-wired and modular wiring), exhaust/ filtration units or custom accessories the project may require. Standard Sizes Choose from over 30 standard sizes available in a an unlimited variety of configurations and designs. Standard heights of 8 and 9 feet are available on A-WALL 200 models with 12 feet the maximum, standard height for A-WALL 300. Unlimited custom sizes and heights are available when necessary, to meet every requirement and require no additional manufacturing time. A-WALL BUILDINGS - STANDARD SIZES System 200, 300, 400 System 500 Forkliftable Buildings 6 x 8 10 x 20 16 x 28 4 x 4 6 x 8 8 x 8 12 x 12 16 x 32 4 x 6 8 x 8 8 x 10 12 x 16 20 x 20 6 x 8 8 x 10 8 x 12 12 x 20 20 x 24 8 x 8 8 x 12 8 x 16 12 x 24 20 x 28 8 x 10 10 x 10 16 x 16 20 x 32 8 x 12 10 x 12 16 x 20 20 x 36 8 x 16 10 x 16 16 x 24 20 x 40 Note: Sizes shown in feet. All dimensions are nominal.