|
Architectural and Environmental
Accessories
A-WALL buildings can be equipped for
virtually any application. The optional accessories that follow are some of the
more commonly requested items used to customize a building to a specific
purpose.
Accessories not shown on this page can be
provided from the factory or locally supplied through the A-WALL dealership.
Custom windows and doors are also available on request.
Every A-WALL building arrives on-site
completely pre-engineered and accompanied by comprehensive assembly drawings
and instructions. No field cutting or fabrication is necessary. All fasteners
are included with the exception the floor anchors, which should be sized and
specified in accordance with the type of existing floor.
Doors
Man
Doors - 3' x 6'-8" x 1¾" honeycomb core or solid core, pre-finished
walnut, legacy or insulated, painted steel.
Double Doors - 6' x
6'-8" x 1¾" honeycomb core or solid core, pre-finished walnut, legacy or
insulated, painted steel. (Doors provided complete with aluminum frame, keyed
lockset, hinges and stop.)
Door Glass - 24" x 36" with tempered,
acrylic, insulated or wireglass, factory glazed.
Door Louvers - 24"
x 12" vision-proof, factory installed.
Door Closers - high quality,
commercial grade standard, or as specified.
Panic Hardware - key in
knob or crash bar, as specified.
Lever-Type Locksets - for ADA
compliance, A-WALL standard, or as specified.
Removable Access
Panels - used in place of a door for infrequent access to equipment in the
building.
Windows
Desk Height
Windows - 39" x 44" x 3/16", or 15" x 44" x 3/16", 36" above floor.
Surveillance Windows - 39" x 60" x 3/16", 18" above floor. (Windows
are factory glazed in panels with tempered, acrylic, insulated or wire glass.)
Sliding Windows - 36" x 38" sliding tempered glass, field assembled
in factory framed opening.
Window Tinting - factory applied film in
assorted shades and degrees of UV filtration.
Heating, Ventilation and Air
Conditioning
Thru-the Wall Units - A/C
only or with electric heat/heat pumps, available in all sizes and efficiencies.
Air Conditioner Cut-outs - factory prepared, framed openings for
thru-the wall units.
Split System Units - A/C only or with electric
heat. Condenser can be located on A-WALL roof with evaporator on wall in
building.
Precision A/C Units - package systems with the ability to
maintain tight temperature and humidity control.
Central HVAC
Systems -custom sized, ducted systems for large buildings and complexes.
Humidification/Dehumidification Systems - systems designed to meet
individual environmental performance requirements.
Positive Pressure
Systems - for process isolation or hazardous, explosion-proof areas.
Negative Pressure Systems - for containment of airborne
contaminants.
HEPA Filter/Blower Modules - self contained units for
clean rooms and white rooms.
Electric Heaters - wall mounted with
fans or baseboard unit, each with thermostat control.
Exhaust Fans -
ceiling, room to room or ducted systems with variable control.
Electrical Packages
Factory Wired Package - contains all of the components of the
electrical kit; however, switches and receptacles are factory installed and
wired in A-WALL panels. An 18" pigtail is provided for field connection.
Flex-4 Modular Wiring System - U.L. listed modular connectors are
factory wired to switches, receptacles and lights. Components simply snap
together on-site. Wiring required only at breaker panel.
NOTE: All
wiring is done in accordance with the National Electrical Code. All components
are U.L. listed.
Sound and Temperature Control
Ceiling Insulation - 2'x4'x6" fiberglass batt insulation;
installs above ceiling tiles.
Basetrack Gasket Tape - self adhesive
foam tape seals void between basetrack and floor.
Steel Roof Deck
Closures - foam inserts for sealing corrugated ends of deck at sidewalls.
Door Seals - closed cell, neoprene gasket seals door at door frame.
Mechanical & Rubber Doors Sweeps - seal gaps at bottom of door.
Optional Ceiling Systems
NRC=75 Ceiling Tiles - 2'x4' mineral board, acoustic tiles
with 25% more sound absorption and greater sound barrier capabilities than
conventional acoustical tiles.
Vinyl Clad Gypsum Ceiling Tiles -
2'x4'x1/2" gypsum tiles with white, vinyl surface. Controls particulate and
provides a positive vapor barrier.
Ceiling Gasket Tape -closed cell,
neoprene gasket tape provides seal between gypsum tile and ceiling grid.
1.5" and 2" Aluminum Ceiling Grid - supports gypsum tiles and the
added weight of HEPA filters without warping or bending. Available with or
without gasket or gel seal.
FRP, Aluminum or Steel EPS Core Panels -
used in place of steel roof deck on buildings where ceiling plenum may be used
for A/C supply air. Provides insulation and a positive vapor
barrier.
|
